[轉載] Google Nexus 10 Take Apart First Look

Today we received and promptly disassembled the Google Nexus 10. In usual fashion we’ll release the take apart video next week, but wanted to go ahead and post the preliminary take apart steps and photos. The model we’ve taken apart is the 16GB Wi-FI model. Model # GT-P8110.

One thing that struck us about this disassembly was the complete ease of taking this tablet apart. Whereas Apple seems to be making it more and more difficult to repair devices by combining parts and using as much glue as possible, Google seems to be taking the complete opposite approach. The end result is a device that is extremely repairable. Go Google!

Another interesting note is how many of the components in the device are manufactured by Samsung. It appears that the battery, processor, and flash memory are all made by Samsung. Is this Google’s way of capitalizing on the drift between Apple and Samsung?

To view the Part Locator (Exploded View) for the Nexus 10, click here.

nexus 10 unboxed Here’s the initial pre take apart photo.
nexus 10 takeapart 2 Begin the take apart by flipping the Nexus 10 over and take off the back cover plate.
nexus 10 takeapart 3 Remove 5 Philips #00 screws under the back cover.
nexus 10 takeapart 4 Work your way around the display using a flat tool and suction cup to separate the display and internals from the back case.
nexus 10 takeapart 5 The back case should separate easily from the rest of the Nexus 10.
nexus 10 takeapart 6 You can now remove any green anti-static tape you see in the unit. The next step is to disconnect the battery. The battery connector is rubberized as opposed to plastic and has flexibility. This means it would be very difficult to break the battery connector when disconnecting it. Again, another plus to the repairability factor.
nexus 10 takeapart 7 Disconnect the three orange cables. Digitizer cable (far left orange cable). Part #: MANTA GT-P8110 GT-P8110KTL. Dock Connector / Microphone / LED cable. LCD Display cable Part #GT-P8110_LCD_FPCB Rev. 1.0 (Manufactured 9/18/2012)
nexus 10 takeapart 9 Remove the 11 Philips #00 screws holding down the battery. The battery lifts up and out.Battery Specs: Samsung Li-Ion 3.75V 22.75Wh 9000 mah SP3496A8H. GB/T18287-2000
nexus 10 takeapart 10 Disconnect 2 #00 philips screws holding the charging dock / microphone assembly. Some light adhesive holds it in place and then just lift out. Part # CUCIALTEC GT-P8110 POGO_MIC_RGBW LED FPCP
nexus 10 takeapart 11 Disconnect micro USB cable. Disconnect Speaker cable (immediately next to micro USB)
nexus 10 takeapart 12 Disconnect front facing camera. The camera just lifts out.
nexus 10 takeapart 13 Remove 1 philips #00 screw holding LED flash. Unplug flex cable. Flash pops out.
nexus 10 takeapart 14 Rear facing camera pops off with flat tool.Part #: DGC39V87 TP8110_G
nexus 10 takeapart 16 The volume buttons are held on with loose adhesive and come out easily with the aid of a flat pry tool.
nexus 10 takeapart 17 Disconnect the right speaker cable. The speaker lifts up and out.
nexus 10 takeapart 19 Remove 3 #00 Philips screws holding down the emi shield on the micro usb + headphone board + vibrator assembly.
nexus 10 takeapart 20 You can now lift the emi shield out and lift up on the vibrator assembly.
nexus 10 takeapart 22 Remove one screw holding down logic board.
nexus 10 takeapart 23 The logic board lifts up and out. There is a slight adhesive where the vibrator assembly cable goes under the logic board.
“nexus You can now remove the left speaker.
nexus 10 takeapart 25 Remove 2 Philips #00 screws holding the Micro HDMI board. The board just lifts out.Part # GT-p8110hdmifpcb Macufactured 9/12/12
nexus 10 takeapart 26 The volume cable in held in place with adhesive. Use a flat tool to remove. Part # GT-P8110 PBA DS.HF. R. RO.7 C39.
nexus 10 motherboard There are two heat shields on the logic board that can be removed by removing the 7 Philips head #00 screws. This allows you to disconnect the vibrator assembly. Here is some info from some of the logic board chips.(Flash Memory – SAMSUNG KLMAG2F2A) (Processor – SAMSUNG EXYNOS GZE003D1 K30F2F200M)(Broadcom – Wireless)(Amtel – mxt1664s)
nexus 10 exploded That’s it. The Nexus 10 display and digitizer are fused together, so that is where the take apart ends.

 

參考資料:
http://www.powerbookmedic.com/wordpress/2012/11/16/google-nexus-10-take-apart-first-look

Please leave your comment on the topic